Filter
Top Products
8-/16-/24-Port 10/100 PoE PSE Web Smart Switch
724-746-5500 l www.blackbox.com
24
Parameter description:
Destination Port: Select the port for monitoring and the egress traffic will be copied to the monitoring port.
Monitor Packets: Enable or Disable if you want to copy the packet from source port to destination port.
Source Port: Select the port you want to monitor the traffic. The traffic will be copied to the monitoring port.
Figure 4-10. Port Mirroring screen.
4.3.3 Bandwidth Control
Function name: Bandwidth Control
Function description: You can limit the bandwidth of received and transmitted frames to each port.
Parameter description: Port Number: Select the port you want to configure.
Tx Rate Value: Set the transmission rate to the selected port. The value can be from 0~255. 0 means full speed.
Rx Rate Value: Set the receiving rate to the selected port. The value can be from 0~255. 0 means full speed.
Resolution: You can choose low or high resolution. Low resolution is 32 kbps and high is 512 kbps.
Connection Speed Resolution Tx Rate Value Rx Rate Value
10 Mbps Low: 32 kbps 0–255 0–255
10 Mbps High: 512 kbps 0–19 0–19
100 Mbps Low: 32 kbps 0–255 0–255
100 Mbps High: 512 kbps 0–195 0–195
In the screen shown on the next page, the table will list each port’s Tx and Rx rate.