Black Box ACR1000A-CTL Network Hardware User Manual


  Open as PDF
of 46
 
Chapter 3: Installation
724-746-5500 | blackbox.com
Page 17
www.adder.com
AdderLink
ADM
ADM
USR
USR
UNC
UNC
ETH1
ETH1
ETH2
ETH2
PWR
PWR
MANAGEMENT SERVER
3.3 Front Panel Indicators
To assist with operational checks and troubleshooting, the front panel provides the following indicators, as shown in Figure 3-5:
Figure 3-5. Front panel indicators.
• ADM On when an administrator is logged in. Flashes when an administrator is accessing the system.
• USR On if there are any connections between channels/receivers. Flashes when a user is accessing the system.
• UNC Unconfigured RX or TX units are online
• ETH1 On when connected, flashes with network activity
• ETH2 On when connected, flashes with network activity
• PWR On when power is applied
3.4 Installation Requirements
• ServSwitchiPATHrequiresthatallServSwitchAgilityunitsthatitcontrolshavefirmwareversion1.9orgreater.
• Whenconfiguringtheinstallationformulticasting(andtoimproveoverallperformance),thenetworkswitch(es)beingused
must support a minimum of IGMP v2 snooping. For faster performance, use switches that support IGMP v3.
• Inordertodisplayvideoresolutionsabove1920x1080,thenetworkswitchmusthavesupportforJumbopackets.
 previous next