Black Box ACR1000A-CTL Network Hardware User Manual


  Open as PDF
of 46
 
ServSwitch iPATH
724-746-5500 | blackbox.com
Page 32
4.6.3 Receivers > Configure Receiver Page
From the View Receivers page, you can configure details for a receiver:
• Click for a receiver.
Note: If the IP address of the receiver is changed, the device will need to reboot itself.
4.6.3.1 Login Required
• No: When selected, anyone can use a receiver terminal and connect to a channel. The channels/permissions displayed to this
anonymous user are those that are set for the “anonymous user” defined within the Dashboard > Settings page.
• Inherit from Receiver Groups: When selected, the requirement for user login will be determined by the “Login Required”
settings within the Receiver Groups to which this unit belongs:
• IfANYofthereceivergroups(towhichthisreceiverbelongs)aresetas“LoginRequired=Yes”,thisreceiverwillrequirelogin.
• IfANYofthereceivergroups(towhichthisreceiverbelongs)aresetas“LoginRequired=Inherit...”andtheglobalsettingis
“loginrequired=yes”,thenthisreceiverwillrequirelogin.
• IfALLreceivergroups(towhichthisreceiverbelongs)aresetas“LoginRequired=No”,thenthisreceiverwillNOTrequire
login.
• Yes: When selected, a user will need to login with the username and password defined in the “Users” section. They will only
be allowed to login if they have been granted permission to access that particular receiver.
4.6.3.2 Group Membership
To facilitate collective permission-granting for numerous receivers, a receiver can belong to one or more receiver groups. Any
permissions applied to the receiver group are inherited by all receivers that are included within the receiver group. For example,
multiple receivers can be made available to a user by placing them all in a receiver group and then granting the user permission to
use that receiver group.
4.6.3.3 Permissions
This is hidden by default as, by default, all users have access to all receivers. You can deny access to particular receivers for a user
in this section. However, be aware that users who are included within user groups may have access to the same receivers via their
groups.
 previous next