Filter
Top Products
Dual Trunk E1 Router
Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 931 2233 133
Table D-42Menu-9C Delay Monitoring configuration
Table D-43Menu-$A Unit Configuration
Next Test —
Selects the type of test to run next.
Options: Ping 511
Ping 1023
Ping 2047
Ping 1:1
Ping All 1s
Ping All 0s
IP Address — nnn.nnn.nnn.nnn
The IP address on which the test is to be run.
DLCI, Port — The DLCI and Port out which the test is
to be run. The DLCI specified must be between 0 and
1024. The port can be NET, DTE, ENET, and COMM.
Test Length — The number of minutes the test is to
last. Selecting a length of zero will choose unlimited
duration.
Test Interval — The number of seconds between test
packets.
Packet Size — The size of the packet sent in the test.
Ping 511
pattern
0.0.0.0
16,NET
0
0
100
Parameter-Definition Default
State
Enables or disables Delay Monitoring on the link.
Not Running
(disabled)
Pattern
The test pattern in the ping packet.
Ping 511 Pattern
DLCI, Port
The DLCI and Port on which the test is to be run.
Port options: NET, DTE, Ethernet, and COMM.
16, NET
Test Interval
Interval size in seconds between transmission of test packets
60
Packet Size
The size of the test packets.
100
Primary
Parameter
Parameter–Options;
Definition Default
UNIT Packet Processing Mode – can be set to Fast Forwarding, Fast Forward Broadcast, or
Routing
Routing
Type Parameter — Definition Default