Black Box LRU4240 Network Router User Manual


 
Dual Trunk E1 Router
Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 96 56 000 153
debug zebos kernel
Use the debug zebos kernel command to specify the debug option-set for the zebos routing manager between the kernel interface
Command Syntax: debug zebos kernel
no debug zebos kernel
There are no arguments or keywords for this command.
Command Mode: Enable
debug zebos packet
Use the debug zebos packet command to specify the debug option-set for the zebos packet
Command Syntax:
debug zebos packet [recv | send | detail]
no debug zebos packet
recv Specifies the debug option-set for receive packet.
send Specifies the debug option-set for send packet.
detail Sets the debug option set to detailed information.
Command Mode: Enable
Examples:
debug zebra packet
debug zebra packet recv detail
show debugging zebos
Use the show debugging zebos command to display debugging information for the zebos routing manager.
Command Syntax
show debugging zebos
Command Mode: Enable
There are no arguments or keywords for this command.
Examples
show debugging zebos
show interface IFNAME
Use the show nterface command to display interface configuration and status
Command Syntax: show interface IFNAME
IFNAME specifies the name of the interface for which status and configuration is desired:
net1 for network port 1
net2 for network port 2
bundle0 for multilink bundle 0
e0 for ethernet port
Command Mode: Enable
Example
kernel(enable)#show interface mlppp
142:Interface mlppp
143:index 2 metric 1 mtu 1500 <>
kernel(enable)#show interface net1
145:Interface net1
146:index 3 metric 1 mtu 1500 <UP,POINTOPOINT,RUNNING>
147:inet 10.1.1.2/24 pointopoint 10.1.1.1 secondary net1
kernel(enable)#show interface net2
149:Interface net2
150:index 4 metric 1 mtu 1500 <UP,POINTOPOINT,RUNNING>
151:inet 10.1.3.1/24 pointopoint 10.1.3.2 secondary net2
kernel(enable)#show interface e0
156: Interface e0
157:index 1 metric 1 mtu 1500 <UP,BROADCAST,RUNNING>
158:HWaddr: 00:a0:c0:00:4d:3f
show ip route
Use the show ip route command to display the IP routing table for a protocol or from a particular table.