Filter
Top Products
198 SALES: 0870 90 10 750 Dual Trunk E1 Router User’s Guide
Dual Trunk E1 Router
============ OSPF router routing table =============
============ OSPF external routing table ===========
OSPF process 110:
============ OSPF network routing table ============
N 10.10.11.0/24 [10] area: 0.0.0.1
directly attached to eth2
============ OSPF router routing table =============
============ OSPF external routing table ===========
ospfd#
ospfd# show ip ospf 100 route
OSPF process 100:
============ OSPF network routing table ============
N 10.10.10.0/24 [10] area: 0.0.0.0
directly attached to eth1
============ OSPF router routing table =============
============ OSPF external routing table ===========
ospfd#
ospfd# show ip ospf 110 route
OSPF process 110:
============ OSPF network routing table ============
N 10.10.11.0/24 [10] area: 0.0.0.1
directly attached to eth2
============ OSPF router routing table =============
============ OSPF external routing table ===========
ospfd#
Examples
ospfd# show ip ospf route
Related Commands
show ip protocols
Use the show ip protocols command to display OSPF process parameters and statistics.
Command Syntax
show ip protocols
There are no arguments or keywords for this command.
Command Mode
Priviledged Exec mode
Usage
This is an example of the output from the show ip protocols command:
ospfd# show ip protocols
Routing Protocol is "ospf 200"
Invalid after 0 seconds, hold down 0, flushed after 0
Outgoing update filter list for all interfaces is
Redistributed kernel filterd by filter1
Incoming update filter list for all interfaces is
Redistributing: kernel
Routing for Networks:
192.30.30.0/24
192.40.40.0/24
Routing Information Sources:
Gateway Distance Last Update
Distance: (default is 110)
Address Mask Distance List
Examples
ospfd# show ip protocols
show memory all
Use the show memory all command to display all memory statistics.
Command Syntax
show memory all
Command Mode