Filter
Top Products
23
CHAPTER 3: Installation
3.2.4 C
ONNECTING
S
UBMASTERS
(O
PTIONAL
)
To connect a submaster Serv type switch (ServSwitch, ServSwitch Ultra, Matrix
ServSwitch, ServManager, etc.) to a master ServSwitch, run a ServSwitch to
ServSwitch Expansion Cable (our product code EHN055 for original cable or
EHN274 for [recommended] coaxial cable) from one of the master Switch’s CPU
ports to (one of) the submaster’s MONITOR/KEYBOARD/MOUSE port(s).
Connect the first submaster to the master Switch’s CPU 1 port and use
consecutively higher-numbered ports (CPU 2, CPU 3, and so on) for the rest of the
submasters. If you are connecting each of
several submaster Matrix ServSwitches to
two PC-only or multiplatform master Switches (see Section 3.3),
connect the CPU
ports of one master to the submasters’ MONITOR/KEYBOARD/MOUSE A ports,
and the CPU ports of the other master to the submasters’ MONITOR/KEYBOARD/
MOUSE B ports.
Before installing an advanced configuration, please call Black Box and discuss
your application with a technician.