Filter
Top Products
Using your DF450
21
Storing one-touch and Quickdial
numbers and names
To store one-touch numbers and names
You can store a fax number, phone number and
a name under each of the 10 One-Touch
buttons. Each number can be up to 38 digits
long and each name up to16 characters long.
To enter a fax number
• Press the FUNCTION button, display
shows
FAX SET-UP.
• Press the START button.
• Press the FUNCTION button until the display
shows
ONE TOUCH DIAL.
• Press the START button and then the (1-10)
button under which you want to store the
number/name; the display shows
FAX NO:
START/STOP/< >.
• Press the START button.
• Dial the fax number you want.
• Press the START button to confirm the
setting.
After confirming the number, the display
shows
SPEED. This is already set to the fastest
possible transmission speed and you will not
normally need to adjust it. Press the
START
button, display shows OVERSEAS.
If you have entered an overseas number, press
the
ᮤ ᮣ
buttons to select ON from the display
as this ensures clearer transmission.
• Press the START button to confirm setting;
the display shows:
NAME
You can now key in the name of the person or
company whose number you have just entered.
If you are connected to a switchboard, you may
also need to store a pause or PBX access code
using the EXTERNAL/PAUSE button, see page 31,
Connecting to a switchboard.
If you make a mistake when keying in a number,
you can delete it by pressing the CLEAR button.
START
FUNCTION