Filter
Top Products
Using your DF450
23
To store Quickdial numbers and names
Your DF450 can store up to 32 names and
numbers which can be accessed by the
Quickdial facility. Names can be up to 16 letters
long and numbers up to 38 digits long.
To enter a fax number
• Press the FUNCTION button; the display
shows
FAX SET-UP.
• Press the START button.
• Press the FUNCTION button until the display
shows
CODED SPEED DIAL.
• Press the START button; the display shows
TYPE SPEED NO.(01-32)
• Using the keypad, type in the two-digit code
you want.
• Press the START button.
• Dial in the fax number you want.
• Press the START button to confirm.
To change transmission speed
After confirming a fax number, the display
shows
SPEED. This is already set to the fastest
possible transmission speed and you will not
normally need to adjust it. To change it for an
overseas transmission, press the
START
button; the display shows OVERSEAS. Press
the
ᮤ ᮣ
buttons to select ON from the display.
This ensures clearer transmission.
• Press the
START button to confirm setting,
display shows:
NAME
If you make a mistake when keying in a number,
you can delete it by pressing the CLEAR button.
You can now key in the name of the person or
company whose number you have just entered.
To enter a name
Use the keypad to enter the name. To do this,
press the number button which shows the
letter you want. By pressing the button, you
can change the letter. For example, if you want
to store the name JOHN:
• Press 5 on the keypad, until display shows J.
• Press the
ᮣ
button to advance the cursor.
• Press 6 on the keypad until the display
shows
O.
• Press the
ᮣ
button to advance the cursor.
• Press 4 on the keypad until H appears on the
display.
• Press the
ᮣ
button to advance the cursor.
• Press 6 on the keypad until N appears on the
display. The whole name is now entered.
• To enter a space, press the
ᮣ
button.
• Press the START button to confirm your
selection. The display asks if you want to
enter another one-touch number.
• To enter another number/name, press the
START button again followed by the
two-digit code you want and repeat the
previous sequence.
• Press the STOP button to return the DF450
to standby mode.
4
56
G
H
I
J
K
L
M
N
O