FUNCTION Press to access the various menus.
CLEAR Deletes incorrect entries.
RX MODE Changes document reception settings.
ᮤ
Scrolls through settings available
under the function button.
RESOL Selects the resolution for scanning
documents to be sent or copied.
-
Decreases the speaker volume (after
pressing the MONITOR button)
ᮣ
Scrolls through settings available
under the function button.
CONTRAST
Selects the contrast for scanning
documents to be sent or copied.
+ Increases the speaker volume (after
pressing the MONITOR button)
QUICKDIAL Sets the machine for you to dial out
numbers stored under the Quickdial
function.
A-a Selects capital or lower case letters
when storing names in the memory.
LAST TX Prints a status report on last fax sent.
REDIAL Redials the last number.
EXTERNAL (If connected to a switchboard): can be
programmed to give you an outside
line, ready to dial.
PAUSE Inserts a pause in a number.
HOLD Puts a telephone call on hold.
2. TONE Use this key to detect secondary dial
tone on certain PBXs. When this
function is activated, a colon will
appear in the display.
MONITOR Allows you to dial a telephone number
without lifting the handset. You can
hear the line tone and dialling tone
through the internal loudspeaker.
A telephone will need to be connected
for you to be able to hold a
conversation.
START Use to send or copy a document.
Confirms the choices and selections
you make on the FUNCTION button.
STOP Stops any current operation; resets the
machine if there is an operating error.
FUNCTION
QUICKDIAL
CLEAR
LAST TX
RX MODE
RESOL.
CONTRAST
ᮤ
ᮣ
-
+
EXTERNAL
HOLD
A - a
REDIAL
PAUSE
2. TONE
MONITOR
START
STOP
Control panel