Additional features
29
Changing the size of incoming
faxes
Your DF450 can reduce incoming faxes onto a
smaller page area.
To change the standard 94% setting:
• Press the FUNCTION button.
• Press the START button until the display
shows
REDUCTION: 94%.
• Press the
ᮤ ᮣ
buttons to display the
reduction options:
80%, 76%, 70% and OFF.
• Press the START button to select your
chosen option.
The DF450 display now shows
SURPLUS. This
enables you to receive faxes of a longer page
length than the paper you are printing on.
• Press the
ᮤ ᮣ
buttons to view the available
settings:
SURPLUS: ON, SURPLUS: OFF or
SURPLUS: AUTO
SURPLUS: ON means any overlapping text will
be printed onto a separate page.
SURPLUS: OFF means any overlapping text will
not be printed.
• Gently pull back the coin to lift out the side
supports.
• Remove the black side supports and put
them in the correct slot:
L = Legal (216mm wide)
A4 = 210mm wide
• Replace the paper cover on the front
of the automatic sheet feeder.
The standard setting is 94% reduction which
allows you to print a document and the fax header
onto an A4 sheet.
Repeat this action for both sides of the automatic
sheet feeder.
L
A4
L
➔
START
FUNCTION