Filter
Top Products
22
Using your DF450
To enter a name
Use the keypad to enter the name. To do this,
press the number button which shows the
letter you want. By pressing the button you can
change the letter. For example, if you want to
store the name JOHN:
• Press 5 on the keypad, until display shows J.
• Press the
ᮣ
button to advance the cursor.
• Press 6 on the keypad until the display
shows
O.
• Press the
ᮣ
button to advance the cursor.
• Press 4 on the keypad until H appears on the
display.
• Press the
ᮣ
button to advance the cursor.
• Press 6 on the keypad until N appears on the
display. The whole name is now entered.
• To enter a space, press the
ᮣ
button.
4
56
G
H
I
J
K
L
M
N
O
• Press the START button to confirm your
selection. The display asks if you want to
enter another one-touch number.
• To enter another number/name, press the
START button again followed by the
one-touch button you want and repeat the
previous sequence.
• Press the STOP button to return the DF450
to standby mode.
To enter a phone number
• Press the FUNCTION button; the display
shows
FAX SET-UP.
• Press the START button.
• Press the FUNCTION button until the display
shows
ONE TOUCH DIAL.
• Press the START button and then the (1-10)
button under which you want to store the
number/name; the display shows
FAX NO:
START/STOP/< >.
• Press
ᮣ
to change the display to TEL
NO: START/STOP/< >.
• Press the START button.
• Dial the phone number you want.
• Press the START button to confirm.
• Display shows: NAME.
If a name has already been entered, press the
START button to continue or the STOP button
to return to standby. To enter or edit a name
see
To enter a name.
If you want to change your entry, you can move
back and forth to the letters you want by pressing
the
ᮤ ᮣ
buttons. Delete the whole name by
pressing the CLEAR button. Press the A - a button
to change between capital letters and small letters.
START
FUNCTION
When entering a name you can insert various
symbols, such as &, using the ✱ and # buttons to
scroll through the options.