Filter
Top Products
If a name has already been entered, press the
START button to continue or the STOP button
to return to standby. To enter or edit a name
see “To enter a name”.
• Press the START button to confirm your
selection. The display asks if you want to
enter another Quickdial number.
• To enter another number/name, press the
START button again followed by the
two-digit code you want and repeat the
previous sequence.
• Press the STOP button to return the DF450
to standby mode.
24
Using your DF450
To enter a phone number
• Press the FUNCTION button, display
shows
FAX SET-UP.
• Press the START button.
• Press the FUNCTION button until the display
shows
CODED SPEED DIAL.
• Press the START button and the display
shows
TYPE SPEED (01-32).
• Using the keypad, type in the two-digit code
you want; the display shows
FAX NO:
START/STOP/< >.
• Press
ᮣ
to change the display to TEL
NO: START/STOP/< >.
• Using the keypad, type in the two-digit code
you want.
• Press the START button.
• Dial the phone number you want.
• Press the START button to confirm.
• Display shows: NAME.
Keep a list handy of all the numbers and names
you have stored on the memory. Your DF450 can
print out a list of all the names and numbers you
have stored. See ‘Print outs’ on page 26.
If you want to change your entry, you can move
back and forth to the letters you want by pressing
the
ᮤ ᮣ
buttons. Delete the whole name by
pressing the CLEAR button. Press the A - a button
to change between capital letters and small letters.
When entering a name you can insert various
symbols, such as &, using the ✱ and # buttons to
scroll through the options.