Filter
Top Products
10 Setting the answer mode
Your DF60 answers calls/receives faxes in one
of four modes:
TAD, MANUAL, FAX or FAX/TEL.
It is preset to TAD mode.
To change the Answer mode:
• Press the FUNCTION button until SET
OPTIONS? appears.
• Press the YES button and the display shows:
DIAL MODE?
• Press the NO button, display shows:
ANSWER MODE?
• Press the YES button and the display shows:
ANSWER: followed by one of the available
answer options.
• Press the NO button to view the available
options:
ANSWER: TAD?
ANSWER: MANUAL?
ANSWER: FAX?
ANSWER: FAX/TEL?
• Press the YES button to select your option.
To switch auto answer mode on/off
If you want to switch your DF60’s auto answer
mode on or off:
• Press the FUNCTION and then the REDIAL
• Auto answer mode is switched off.
• Repeat this procedure to switch Auto answer
mode back on.
Which setting is correct for you?
ANSWER: TAD (telephone answering device)
When your DF60 is set to TAD mode it will
receive both voice messages and faxes.
Calls are answered automatically after the
number of rings you have set, and your
outgoing message is played back, callers can
then leave a message.
If your DF60 detects a fax signal whilst the
answer machine is operating, or if no message
is left, it will automatically switch to
FAX mode
and faxes are received as normal.
If you have selected TAD mode the display will
show: RING COUNT: 2ND? This means that
your DF60 will automatically answer calls after
two rings. If you want to change the number of
rings before answering, pressing the NO
button will display the available options.
• Press the YES button to select your option.
• Press the STOP/CLEAR button to return
to standby.
The auto answer mode will be either the default
mode or the one you have selected.
10
Setting up