Filter
Top Products
28
Using the fax machine
To set up for daily polling
You can poll another machine at a designated
time each day.
• Press the FUNCTION button until the
display shows:
DELAYED FEATURE?
• Press the YES button then press the
NO button until the display shows:
DAILY
POLLING?
• Press the YES button and the display
shows:
TIME: XX:XX (current time).
• Using the key pad enter the time you want
to poll.
• Press the YES button, display shows:
PHONE :_
• Using the key pad enter the number you
want to poll.
• Press the YES button.
• Until reset, your DF60 will poll this number
at the same time every day.
To cancel daily polling repeat the above
procedure, when display shows: CANCEL?
followed by the number you have set, press the
YES button.
If daily polling is already set the display shows:
CANCEL? followed by the fax number to be polled.
• Press the YES button to cancel polling, display
shows: DOCUMENT SET
You must now begin programming the daily
polling function again.
Print outs
Your DF60 will automatically print out an
activity report, after every 50 transactions. It
will also print out a confirmation report after
every failed transaction. In addition your DF60
can be set to print out a confirmation report
either after every sent fax or after every
transaction.
To change the confirmation reports
• Press the FUNCTION button until display
shows:
SET OPTIONS?
• Press the YES button display shows:
DIAL MODE?
• Press the NO button until display
shows:
CONFIRM REPORT?
• Press the YES button.
• Press the NO button to display the available
options:
CONFIRM: NO?, CONFIRM: TX
ONLY? or CONFIRM: TX & RX?
• Press the YES button to confirm your option.
CONFIRM: NO? Only failed transaction
reports will be printed.
CONFIRM: TX ONLY? Failed transaction and
sent transaction
reports will be printed.
CONFIRM: TX & RX? Reports will be printed
after every transaction.