Filter
Top Products
Recording a memo
A message can be left using your DF60’s
handset. This message is called a memo.
• Display shows: TAD FUNCTION.
To record a memo
• Press the TAD button, display shows:
TAD FUNCTION
• Press the DEL/REC button, display shows:
RECORD OGM?
• Press the NO button, display shows:
RECORD MEMO ?
• Press the YES button, display shows:
LIFT HANDSET!!
• Pick up the handset within 10 seconds and
speak clearly into it to record your message,
display shows:
RECORD MEMO (01)
As you record your memo the display indicates
the length of the message in minutes and
seconds
00:00.
• When you have finished your message,
replace the handset and the message is
automatically played back to you.
The display will then ask if you want to record
a second message.
• Press the YES button if you wish to record
another message.
• Press the STOP/CLEAR button twice to
return to standby mode.
To limit your memo recording time
Your DF60 has a total recording time of 10
minutes. You can limit the amount of time
allowed for each memo.
• Press the TAD button then press the
ᮤᮤ
button, display shows: REMOTE TAD: ON? or
REMOTE TAD: OFF?
• Keep pressing the YES button until the
display shows:
MEMO TIME OUT: OFF?
• Press the NO button to change the display
from OFF to ON.
• Press the YES button to select your option.
If you select ON, display shows:
RECORD
TIME: 30s? Pressing the NO button will display
the available options:
20 - 70s.
• Press the YES button to select your option.
• Press the STOP/CLEAR button to return to
standby mode.
If you selected OFF the recording time is
unlimited.
To playback or erase a memo
Your DF60 treats memos as incoming
messages and they are all played back in
chronological order - to play back or erase see
Incoming messages and memos (page 18).
Limiting the amount of time allowed for a memo
will also limit the time allowed for an outgoing
message to be recorded. However, it will not affect
a previously recorded outgoing message.
Using the answering
machine
21