Filter
Top Products
You can now enter a name using the keypad in
the same way as for one-touch names.
• Press the YES button to confirm your entry,
display shows:
(XX) NUMBER:_.
You can now enter a number using the keypad
in the same way as for one-touch names.
• Press the YES button to confirm your entry,
display shows:
SET CODED DIAL?.
Repeat the above process to enter up to 44
more names and numbers.
• Press the STOP/CLEAR button to return to
standby mode.
To dial one-touch fax/phone numbers
• Press the MONITOR button or lift the
handset.
• Press the relevant one touch button (01-04),
the display shows the number to be dialled.
Your DF60 automatically dials the stored
number.
To store SPEED DIAL fax/phone names and
numbers
Your DF60 can store up to 45 names and
numbers which can be accessed by using the
SPEED DIAL facility.
• Press the FUNCTION button until the
display shows:
SET CODED DIAL?
• Press the YES button and the display
shows:
CODE NUMBER? (_ )
• Using the keypad, enter the two digit code
between 05 and 49, under which you want to
store the name and number, display shows:
(XX) NAME:_. (XX is the code number you
entered)
14
Using the telephone
Keep a reminder of the names in the one-touch
memory on the panel to the left of the one-touch
buttons. Slide out the plastic cover, write in the
names and replace the cover. Writing the name in
pencil allows you to neatly change it if necessary.
Additional labels are printed on page 38.
Your DF60 can print out a list of all the names
and numbers stored in it’s one touch dial memory.
Please refer to “print outs” on page 28.
Speed dial code numbers must be between 05 and
49. Numbers 01 to 04 are used by the one touch
dialling memories.
You can enter a name of up to 11 characters and
a number of up to 34 digits in length into your
DF60’s speed dial memory.
Your DF60 can print out a list of all the names
and numbers stored in it’s speed dial memory.
Please refer to “print outs” on page 28.
Use the
ᮣ
button to enter spaces or to move from
left to right through the display.
Use the
ᮤ
button to delete digits.