Filter
Top Products
EDITING A LABEL
46
Creating a Barcode Label
zBarcode Settingsz
Entering Barcode Data
Press the key to display the Setup menu, select
"Barcode Input" using the or key, and then
press the or key.
The Barcode Input screen is displayed.
Type in the barcode data.
Special characters can be entered in the barcode when
using the CODE39, CODABAR, CODE128 or EAN128
protocols. When not using special characters, go to
step 5.
Press the key.
A list of characters available for the current protocol is
displayed.
Select a character using
the or
key, then press
the or
key to insert the character in the barcode
data.
Attribute Value
Protocol
CODE39
, CODE128, EAN8, EAN13, EAN128,
UPC-A, UPC-E, I-2/5, CODABAR
Width
Large
Small
Under#
(characters printed
below barcode)
On
Off
C.Digit
(check digit)
Off
On
(only available for the CODE39, I-2/5
and CODABAR protocols)
• Up to five barcodes can be entered in a label.
• Pressing key while holding down key
will also allow you to go to "Barcode Input".
1
2
3
4