Filter
Top Products
1
2
3
4
5
6
7
8
9
67
z TROUBLESHOOTING
Error Messages
The value entered for setting the tape length, tab length,
multiple copies, or numbering function is invalid. Enter a valid
value for the setting.
The tape length is shorter than the total margin length set in
the "Large Margin" cutting option.
The length of the label to be printed using the text entered is
longer than the length setting. Edit the text to fit within the set
length or change the length setting.
The text size is too large. Select a different size option.
The number of digits entered in the barcode data does not
match the number of digits set in the barcode parameters.
Enter the correct number of digits.
The barcode data entered does not have the required start/
stop code (A, B, C, or D required at the beginning and end of
the barcode data for the CODABAR protocol). Enter the
barcode data correctly.
There are already 5 barcodes entered in the text data when
you try to enter a new barcode. You can only use up to five
barcodes in each label.
Message Cause/Remedy
When you select "inch" for your unit setting, the dimensions appear "inch" on the LCD display.