Filter
Top Products
TCP/IP CONFIGURATION 10 - 10
Certain BOOTP host software implementations will not respond to
BOOTP requests if you have not included a download filename in the
configuration file; if this is the case, simply create a null file on the host
and specify the name of this file and its path in the configuration file.
As with rarp, the print server will load its IP address from the BOOTP
server when the printer is powered on.
Configuring the IP Address with BRCONFIG
Users of Novell networks have additional alternatives for configuring
the IP address of Brother print servers by using the remote console
facility.
On a NetWare network, you can use the BRCONFIG utility which is
included with every print server.
Execute BRCONFIG from the Windows
®
menu. Select the
corresponding server name from the list of print servers. When you
get the message that the print server is connected, type the default
password access in response to the “#” prompt.
You will be prompted for a user name. Enter anything in response to
this prompt.
You will then get the Local> prompt. Type SET IP ADDRESS
ipaddress, where ipaddress is the desired IP address you wish
to assign to the print server (check with your network manager for the
IP address to use). For example:
Local> SET IP ADDRESS 192.189.207.3
You will now need to set the subnet mask by typing SET IP SUBNET
subnet mask, where subnet mask is the desired subnet mask
you wish to assign to the print server (check with your network
manager for the subnet mask to use). For example:
Local> SET IP SUBNET 255.255.255.0