Filter
Top Products
6 - 11 NOVELL NETWARE PRINTING
18
Start the appropriate BRAdmin application, and select the
correct print server from the list (by default, the node name is
BRN_xxxxxx, where xxxxxx is the last six digits of the
Ethernet address (MAC address)).
19
Double click the appropriate Brother print server. You will be
prompted for a password, the default password is access. Now
select the NetWare tab.
20
Select Queue Server as the operating mode.
The same service assigned by NetWare server name cannot be
used for both queue server mode and remote printer mode.
21
Enter the NDS tree name (note that a print server can service
both NDS and bindery queues).
22
Type in the name of the context where the print server resides.
23
Exit the BRAdmin application making sure that you save the
changes that you have made. You are now ready to print.
If you want to enable queue server capabilities on services
other than the default NetWare services, you must define
new services that are enabled for NetWare and for the
desired port. Refer to the Appendix in this manual for
information on how to do this.