Filter
Top Products
NOVELL NETWARE PRINTING 6 - 6
5
Select None for the printer Type, and Novell Port Handler for
the Port Handler Type. Then click OK.
6
You must now specify the type of connection that you are going
to use. There are four possible options. Select the LPR over IP
option.
7
Enter the relevant details of the printer and Brother
recommends typing Binary_P1 for the printer name. Click
finish and wait. Select the printer drivers for the client operating
systems.
You are now ready to print.
Configuring NetWare 3 and NetWare 4 Systems
Brother's BRAdmin application provides similar functionality to the
NetWare PCONSOLE utility (or the NWADMIN utility in NetWare
4.1x or later). To use the BRAdmin application to configure a Brother
print server under NetWare, make sure that you are logged in as
SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN (NetWare 4.1x or
later) and perform the appropriate steps as detailed in the following
pages.
Creating the NetWare Print Server (Bindery Queue
Server) Using BRAdmin Professional Utility
1
Make sure that you logged in as SUPERVISOR (NetWare 2.xx
or 3.xx) or ADMIN (NetWare 4.xx or later).
2
Start BRAdmin.
You must install the Novell NetWare Client 32 if you wish to
create queue information on your NetWare servers by
BRAdmin.