Filter
Top Products
General Information
8
1
Charging battery
a Make sure that your computer is ON.
b Connect the supplied Micro USB Cable to the micro USB port on the rear of your scanner.
c Connect the cable to your computer. The battery starts charging automatically.
d The Power button lights up green while the battery is charging, and goes off when charging is
complete.
NOTE
• When charging the battery, press and hold the Power button to turn off your scanner. You can charge
the battery with the power either on or off, but charging takes more time than when the scanner is off.
• When charging the battery with the power on, slide the Wi-Fi
®
switch to OFF.
• When the scanner is turned on, the battery level is displayed on the LCD panel.
Battery icon Power level
Full
Half full
Low