82
CAUTION
If you are not able to find the yellow
protective part, DO NOT remove the ink
cartridge before shipping. It is essential that
the machine be shipped with either the
yellow protective part or the ink cartridge in
position. Shipping without them will cause
damage to your machine and may void your
warranty.
d Unplug the machine from the telephone
wall jack and take the telephone line
cord out of the machine.
e Unplug the machine from the AC power
outlet.
f Unplug the interface cable from the
machine, if it is connected.
g If your machine has a handset, remove
it and the handset curled cord.
h Wrap the machine in the bag and put it
in the original carton with the original
packing material.
i Pack the printed materials and
additional parts in the original carton as
shown below. Do NOT pack the used ink
cartridges in the carton.
Note
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts and printed materials to use with
your ‘Exchange’ machine.
j Close the carton and tape it shut.