Brother FAX 2600 Fax Machine User Manual


 
4 - 1
INITIAL SETUP
4
4
Initial Setup
Getting Started
After you have assembled your machine uing the Brother StartCard, continue
the setup by programming the rest of the initial settings.
Setting Date and Time
Your FAX/MFC displays the date and time, and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time. All other
settings remain unaffected.
1
For the FAX, press Function, 1, 1.
For the MFC, press Function, 1, 1, 1.
2
Enter the last two digits of the year and press
Set.
3
Enter two digits for the month and press Set
(for example, enter 09 for September).
4
Enter two digits for the day (for example, 06)
and press Set.
5
Enter the time in 24-hour format and press Set (for example, enter 15:25 for
3:25 PM).
6
Press Stop.
The screen now displays the date and time you set, and displays it whenever the
FAX/MFC is in Standby mode.
Setting Station ID
You can store your name, fax number, and telephone number to be printed on
all fax pages you send. (See
Composing Electronic Cover Page, page 6-4 and
Entering Text, page 4-2.)
1
For the FAX, press Function, 1, 2.
For the MFC, press Function, 1, 1, 2.
2
Enter your fax number (up to 20 digits)
and press Set.
(You must enter a fax number to proceed.)
3
Enter your telephone number (up to 20 digits)
and press Set.
(This number appears on Cover pages.)
If your telephone number and fax number are the same, enter the same number
again. The LCD displays your entry.
ENTER YEAR:XX
ENTER MONTH:XX
ENTER DAY:XX
ENTER TIME:XX:XX
FAX:
TEL:
NAME: