Brother FAX 2600 Fax Machine User Manual


 
5 - 9
SETUP RECEIVE
Telephone Services
Distinctive Ring
This FAX/MFC feature lets you use the Distinctive Ring subscriber service
offered by some telephone companies, which allows you to have several
telephone numbers on one phone line. Each phone number has its own
Distinctive Ring pattern, so you’ll know which phone number is ringing. This is
one way you can have a separate phone number for your FAX/MFC.
Your FAX/MFC has a Distinctive Ring function, allowing you to dedicate one
phone number just for receiving faxes. You’ll need to follow the directions
below to “register” the new Distinctive Ringing pattern, that was assigned by the
Telephone Company, so your FAX/MFC can recognize its incoming calls.
Note
You can change or cancel the Distinctive Ring pattern at any time. You can
switch it off temporarily, then turn it back on. When you get a new fax number,
be sure to reset this function.
You can register only one Distinctive Ring pattern with the FAX/MFC. Some
ringing patterns cannot be registered.
The FAX/MFC will answer only calls to its registered number.
You will not hear the first two rings of all incoming calls on the machine.
To have your TAD answer only the main number, the FAX/MFC must be in
Manual mode.
In FAX/TEL or FAX mode, the FAX/MFC will answer all numbers on the phone
line.