Filter
Top Products
5 - 7
SETUP RECEIVE
Polling
Polling is the process of retrieving faxes from another fax machine. You can
use your FAX/MFC to “poll” other machines, or you can have someone poll
your machine.
All parties involved in polling need to set up their fax machines to accommodate
polling. When someone polls your machine to receive a fax, they pay for the
call; if you poll someone’s fax machine to receive a fax, you pay for the call.
Setting Up Polling Receive
Polling Receive is when you call another fax machine to receive a fax from it.
1
For the FAX, press Function, 2, 8.
For the MFC, press Function, 1, 2, 8.
2
Press or to choose ON and press Set.
3
Enter the fax number you are polling.
4
Press Start.
The screen displays DIALING.
Setting Up Sequential Polling Receive
The FAX/MFC can request documents from several fax units in a single
operation. Afterward, a Sequential Polling Report will be printed. (See
Canceling a Scheduled Job, page 5-8.)
1
For the FAX, press Function, 2, 8.
For the MFC, press Function, 1, 2, 8.
2
Press or to select Polling ON and
press Set.
3
Specify the destination fax machines you wish to poll, using One Touch, Speed
Dial, a Group or the dial pad. You must press Broadcast between each
location.
4
Press Start. The FAX/MFC will poll each
number or group member in turn for a
document.
Some fax machines do not respond to the polling function.
POLLING RX:OFF?
SELECT <- -> & SET
ENTER FAX NO.
PRESS START KEY
POLLING RX:OFF?
SELECT <- -> & SET
POLLING RX:ON?
ENTER FAX NO.
PRESS START KEY
ACCEPTED
DIALING #01