Filter
Top Products
SETUP SEND
6 - 10
Setting Up Polled Transmit
Polled Transmit is when you set up your FAX/MFC to wait with an original so
another fax machine can retrieve it. (See
Interrupting Delayed Fax and Polled
Transmit Jobs
, page 6-10.)
1
Place the original to be retrieved face down in the ADF.
2
For the FAX, press Function, 3, 8.
For the MFC, press Function, 1, 3, 8.
3
Press or to choose POLLED TX:ON?
and press Set.
4
Press 1 to select DOC if you want your FAX/MFC to scan the printed original
at the time it is polled—OR—Press 2 to select MEMORY.
5
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings and go to Step 6.
6
Press Start.
Interrupting Delayed Fax and Polled Transmit Jobs
You can send a fax or make a copy now, even if you have the FAX/MFC set to
send a fax later or to be polled. However, you cannot use automatic redial or the
Function mode.
1
For the FAX, press Function, 5.
For the MFC, press Function, 1, 5.
2
Wait 2 seconds, then remove the original
that are waiting in the ADF.
3
Place the “new” original you want to send or make a copy now in the ADF.
4
Enter the new fax number for the original you want to send now.
5
Press Start.
6
After the transmission is finished, place the “old” original back into the ADF.
7
For the FAX, press Function, 5, for the MFC, press Function, 1, 5, to restore
the Delayed Fax and/or Polling.
If you pressed 1 in Step 4, the printed original remains in the ADF until your
FAX/MFC is polled. However, you can “interrupt” it to send another fax.
POLLED TX:OFF?
SELECT <- -> & SET
1.DOC 2.MEMORY
INSERT ORIGINAL