Filter
Top Products
66
CHAPTER SEVEN
You can include up to 23 One Touch locations, and up to 100 speed Dial
locations. If you broadcast to more than the maximum locations available,
you will be unable to set up transmissions using Dual Access and the Timer.
1
Press
Function
,
6
,
3
.
The screen displays
SELECT ONE-TOUCH
2
Select a One Touch key where you wish to store the Group number.
(For example, press One Touch key
02
for Group 1).
SETUP GROUP:GO
ENTER & SET
3
Use the dial pad to enter the Group number. (For example, press
1
for
Group 1).
4
Press
Set
.
5
To include One Touch or Speed Dial numbers in the Group, enter them
as if you were dialing. For example, for One Touch key
05
, press One
Touch key
05
. For Speed Dial location 09, press
Speed Dial
, then press
0
,
9
on the dial pad. The display shows 05, #09.
G01:*O5#O9
6
Press
Set
. The screen prompts you to enter a name.
NAME:
ENTER & SET
7
Use the dial pad and the chart on page 29 to enter a name for the group
(for example, NEW CLIENTS).
8
Press
Set
.
9
Press
Stop
to exit.
You can print a list of all One Touch and Speed Dial numbers. See Chapter 10,
Printing Reports.
Even if you lose electrical power, numbers stored in memory will not be lost.
See
Storing
One Touch Dial
Numbers
p. 63
and
Storing Speed
Dial Numbers
p. 64
and
Broadcasting
p. 59