Brother HL-600 Printer User Manual


 
CHAPTER 3 CONTROL PANEL
3–1
CHAPTER 3
CONTROL PANEL
LAMPS
This section refers to the following lamps on the printer control panel.
Fig. 3-1 Lamps on Control Panel
Note
When the power cord is not plugged into the AC outlet or the printer is in
sleep mode, all lamps including the READY lamp are off.
READY Lamp
The green READY lamp indicates the current status of the printer.
The printer will wake up automatically from sleep mode data is received
or a switch is pressed when the power cord is plugged in.
Lamp Printer status
Off
The power cord is not plugged into the AC outlet.
The printer is in the sleep mode.
Blinking
❍↔●
The printer is warming up.
(Blinking at 0.5 seconds)
Blinking
❍↔●
The printer is off-line.
(Blinking at 1 seconds)
On
The printer is on-line.