Filter
Top Products
USER’S GUIDE
6–2
For errors shown below, the printer indicates an operator call by
blinking the ALARM lamp and printing the error messages on paper.
Error Action
Memory Full
• Press the FF/CONT switch to print the data
remaining in the printer.
• If you are using the supplied Windows driver, try
again after setting the TrueType mode to “Print as
Graphics” in the PRINT menu of your application
software.
• Expand the printer memory with the optional
memory board.
• Reduce the print resolution or reduce the
complexity of your document.
Print Overrun
• Press the FF/CONT switch to print the data
remaining in the printer.
• If you use the supplied Windows driver, try again
after setting the TrueType mode to ‘Print as
Graphics’ in the PRINT menu of your application
software.
• If this does not clear the error, reduce the
complexity of your document or reduce the print
resolution.
Centronics
Interface Line
Error
• Press the FF/CONT switch to resume printing.
• Check that the connection between your computer
and printer is secure and correct, and check the
interface cable.
Serial Interface
Framing Error
• Press the FF/CONT switch to resume printing.
• Check the communication parameters settings such
as baud rate and stop bit on both your computer and
printer.
Serial Interface
Parity Error
• Press the FF/CONT switch to resume printing.
• Check the communication parameters settings such
as bit length and parity on both your computer and
printer.
Serial Interface
Overrun Error
• Press the FF/CONT switch to resume printing.
• The interface hardware may be damaged, consult
your dealer.