Filter
Top Products
CHAPTER 4 OPTIONS
4–1
CHAPTER 4
OPTIONS
SERIAL INTERFACE BOARD
To connect the printer with a serial interface to a DOS computer or to an
Apple Macintosh computer, you need to install the optional serial
interface board. When you have installed a serial interface board, you can
share the printer between two computers using the parallel and serial
interfaces at the same time. Automatic interface selection is a standard
feature.
✒ Note
The serial interface board for this printer is optional, but in some
countries the serial interface board may have been installed by either the
factory or dealer.
The serial interface board is installed onto the main controller board
inside the printer. For the details about installation, see the instruction
guide which was provided with the serial interface board.
Fig. 4-1 Serial Interface Board