Filter
Top Products
CHAPTER 3 CONTROL PANEL
3–3
SWITCHES
This printer has the following control panel switches.
Fig. 3-2 Switches on Control Panel
✒ Note
This printer has no power switch. You just plug the power cord into the
AC outlet. The sleep mode feature handles all power control. For more
information on sleep mode, see “OTHER CONTROL FEATURES” in
this chapter.
SELECT (RESET) Switch
The lower switch on the control panel can work as the SELECT or
RESET switch.
SELECT Switch
The SELECT switch turns the printer on-line and off-line alternately.
When the printer is on-line, the READY lamp is on. When the printer is
off-line, the READY lamp is blinking respectively.
If you press the SELECT switch during printing, the printer immediately
stops printing even if the printer has started to print. It ejects the page,
and then enters the off-line status. Press the SELECT switch again and
the printer will print the complete page again.