Brother HL-600 Printer User Manual


 
USER’S GUIDE
5–12
Warning
Use water or neutral detergents for cleaning. Cleaning with volatile
liquids such as thinners or benzene will damage the internal surfaces of
the printer.
6. Take the drum unit out of the printer and put it aside.
7. Wipe the following electric plates , , with cleaning alcohol on a
cotton swab. Wipe the scanner window and the toner sensor with
a soft dry cloth.
Fig. 5-17 Cleaning the Printer Interior
Warning
Do not wipe the scanner window with cleaning alcohol (isophorol).
Make sure that the arrow marks on the toner cartridge are aligned with
each other before turning the drum unit upside down. See the section
“REPLACE THE TONER CARTRIDGE” in Chapter 5.
8. Turn the drum unit upside down carefully.
Caution
Handle the drum unit carefully as it contains the toner. If toner scatters
and your hands or cloths get dirty, wipe or wash it off with cold water
immidiately.
Toner Sensor
Clean Here
Electric Plate
Electric Plate
Scanner Window
Electric Plate