Filter
Top Products
USING THE MFC AS A PRINTER
9-5
MFC 4450/OP-US-5.0
Printer
NOTE
The MFC periodically will print any data remaining in the memory .
Test/Reset Key
<TEST PRINT>
This key is used to print a test sample page. If data remains in the printer memory,
press On/OffLine to turn the printer offline and press Test/Reset. The MFC will
print the remaining data first and then will print a test sample page. If the printer
is online, the MFC can not print a test sample page.
<RESET>
When Test/Reset is pressed together with Shift, it clears data from the memory. The
printer is also reset and restored to the factory default settings.
Remember that the Test/Reset switch clears data from the printer memory.
Print Priority Key
When this key is first pressed, it puts the MFC exclusively in printer mode. All fax
data will be stored in the memory instead of printing on paper. When this key is
pressed again, and PC data is not being sent or the MFC has completed printing, it
will exit automatically from the print priority status. When the Print Priority key
is pressed, it increases the memory available for printing without decreasing memory
available for memory transmission and incoming faxes.