Filter
Top Products
6-8
MFC 4450/OP-US-5.0
Receive FAX
Recommended
Reduction Ratio is:
93%
100%
87%
93%
100%
75%
93%
Selecting the Ratios of Fixed Reduction
Other party sends you a document
the size of…
FOR YOUR INFORMATION
• You can use Auto Reduction to reduce incoming documents to fit on one
page of paper, only as long as the original document is not longer than
legal size. If the original is longer than legal size, the data will not be
reduced (see For Your Information below) and will carry over to print on
a second page.
• When you use Auto Reduction and you receive an incoming document
that is smaller than your paper, no reduction will take place.
• When selecting Fixed Reduction, you must consider the size of the paper
as registered in Function menu 5-6. (See page 6-5.) If you selected letter
size, you can choose a reduction of 93%, 87%, or 75%. If you selected A4
size, you can choose a reduction of only 93% or 87%. And if you selected
legal size, you can choose only 93%.
NOTICE
Your paper size is:
Letter
A4, Legal
Letter
A4
Legal
Letter
Legal
Letter document (8.5"x11")
(mostly Domestic communications)
A4 document (8.2"x11.6")
(mostly Internatlonal communications)
Legal documents (8.5"x14")
Reception into Memory (Out of Paper Reception)
If the multipurpose sheet feeder is empty, the LCD will display the message
CHECK PAPER. Add more paper.
Your MFC automatically will store incoming faxes in its memory if it runs
out of paper. The contents of the memory will be printed automatically
when you replace the paper. The memory will not be lost as long as you do
not turn off the MFC or disconnect the power.
BASIC SETUP TO RECEIVE FAXES
RECEIVING FAXES AND OTHER CALLS