Filter
Top Products
TROUBLESHOOTING PROCEDURES
14-14
MFC 4450/OP-US-5.0
Printed pages are
blurred at the center or
at either edge.
Certain environmental conditions such as humidity, high
temperatures, etc. may cause this condition to occur.
• Make sure the MFC is placed on a flat, horizontal surface.
• Remove the drum unit with the toner cartridge installed. Try
rocking them from side to side.
• You may clear a blurred page by wiping the scanner windows
with a clean soft cloth. (See “Regular Maintenance” and
“Cleaning the Drum Unit” on page 13-1~3.)
If a blurred page occurs after cleaning and the display shows
CHANGE DRUM, replace the drum unit with a new one.
• Turn the print density dial counterclockwise for lighter images.
See “The Print is too Light or too Dark” on page 14-5.
• Make sure that you use paper that meets the spacifications.
Rough surface or thick media can cause ghost image.
Ghost images appear on
printed pages.
Blurred Page
Ghost Images
Difficulty Suggestions
NOTE
The drum unit is a consumable item, and it is necessary to replace it periodically.