Filter
Top Products
6-22
MFC 4450/OP-US-5.0
Receive FAX
6. Press Stop.
NOTE: The display should say D/R SET
MODE. Also, the answer mode
lights will flash. You must now
wait for someone to call the
distinctive ringing fax number.
7. When the phone rings, listen carefully to
check that the ringing pattern is the one
you want to register. If it is,
wait until the
display says PICK UP TO SET. Then pick
up the external handset.
D/R SET MODE
ONLINE
PICK UP TO SET
START TO SET
STOP TO CANCEL
REGISTERED
TELEPHONE/FAX
ONLINE
After you complete this one-time setup:
1. The Distinctive Ringing function automatically will be changed from SET to ON.
Set the answer mode based upon your needs.
2. Be sure to have a friend call you on
both numbers to test that everything is set up
correctly.
3. If you do not complete this function by pressing Start key to register a number, your
MFC will stay in D/R SET MODE. So, if you decide
not to register a number, you
must repeat Steps 1~8 and in Step 6 change the mode to OFF.
How to Turn the Distinctive Ringing Function ON or OFF
The distinctive ringing function is designed to accommodate the distinctive ringing
service (a telephone service that provides you with multiple numbers, each with a
distinctive ring pattern, on one line). You can change the distinctive ringing function
setting to ON or OFF as needed
after you have registered the distinctive ringing
number in the function called Setting the Distinctive Ringing Function. To change the
setting, repeat Steps 1~8 above; Step 4 is where you can select either ON or OFF.
8. Press Start to set.Check that the display
says REGISTERED.
(If the other number was called, press
Stop to cancel.)
9. Press Start again to receive the incoming
fax, or if the call is a voice call, talk into
the external handset.
DISTINCTIVE RINGING (WITH AN EXTERNAL TELEPHONE CONNECTED TO THE MFC)
RECEIVING FAXES AND OTHER CALLS
DISTINCTIVE:SET
6.DISTINCTIVE
4. Press Z (left arrow) or X (right arrow)
to find the SET mode.
5. Press Set.