Filter
Top Products
POLLING
7-5
MFC 4450/OP-US-5.0
KEYS TO PRESS THE DISPLAY WILL SHOW:
09/12/1998 15:25
ONLINE
ENTER NO. & SET
1. Make sure there are no documents in the
feeder.
2. Press Function.
3. Press 1.
4. Press 2.
Setting Up Polled Waiting with Super Quick-Scan
Before pressing Start, press Super Q.Scan so that you can store your Polled Waiting
document in the memory. If you use Super Q.Scan to place the Polled Waiting
documents into the memory, they will not be erased automatically after they are
polled. To erase them you must use the Cancel Job function. (See page 5-14.)
Sequential Polling
This function is the reverse of Broadcasting, in which your MFC sends a document
to several destinations. In a sequential polling operation, your MFC will request
documents from several fax units in a single operation.
After all the polling operations are finished, a Sequential Polling Report will be
printed automatically.
1.TEMP.SETTINGS
2.POLLING
ENTER FAX NO.
ONLINE
POLLING:ON
2.POLLING
POLLING:OFF
SELECT { } & SET
PRESS START KEY
ONLINE
5. Press Z (left arrow) or X (right arrow)
to select Polling ON.
6. Press Set.
7. Press Stop.