Filter
Top Products
2-5
HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY
MFC 4450/OP-US-5.0
Information
Page
Factory
setting
Level two
function
Explanation of Options
Level one
function
00MIN 2-10~11
TONE
3-1
2 6-2~3
OFF
6-18~22
6. DISTINCTIVE
2. RING DELAY
1. TONE/PULSE
8. SLEEP MODE
L O W 6-10
3. SPEAKER
VOLUME
HIGH 6-115. RING VOLUME
20 6-4
4. F/T RING
TIME
9. PRINT
DENSITY
6-9
5. USER
OPTIONS
This mode reduces the power consumption
when the MFC is idle. The time period
before the MFC drops into the mode is
user selectable.
You can adjust Print Density with this
function.
There are two different dial types and
you must select the type of signal suitable
for your telephone line.
TONE/PULSE
This is the number of rings before the
MFC answers the call when in F/T or Fax
Mode.
0/1/2/3/4 rings
You can adjust the speaker volume with
this function.
OFF/LOW/HIGH
F/T RING TIME sets the time for
simulated ringing in F/T mode.
10/20/30/60 seconds
The settings are OFF/LOW/HIGH.
If you have distinctive ringing service
from your phone company, you can use
this function to register the ringing
pattern of your fax number. And if you set
it to ON, you can use the registered
number as a fax number only.
OFF/ON/SET
If you enter the date and time in 24-hour
format, the LCD will display the date and
time and they will be printed on outgoing
faxes.
If you frequently have delayed jobs, all
for execution at same time each day, you
can program that time. Once you register
it, you do not have to enter that time, just
set Timer Transmission in temporary
settings.
1. DATE/TIME
2. DAILY TIMER
7. SETUP
SYSTEM
00:00 5-9
01/01/1999
00:00
3-2
6. TEL
OPTIONS