Filter
Top Products
HOW TO USE THE COPY FUNCTION
11-1
MFC 4450/OP-US-5.0
11. HOW TO USE THE COPY FUNCTION
Use the Copy key to make a single copy or multiple copies. When making copies,
check that the text or image on the original document is not too close to the edge. Your
MFC can not read anything closer than 4 mm (1/8 inch) from the edge. Original
documents should be straight and not wrinkled or they may jam. Also, do not pull on
the paper while copying is in progress or you may distort the image and damage your
MFC.
Make sure there is enough paper in the MFC. And when making multiple copies, do
not let the paper tray become overstacked. Remove copies from the paper tray.
Set the resolution to either PHOTO, FINE or S.FINE. If you select STANDARD, the
resolution will change automatically to S.FINE. However, when you make a single
copy and select S.FINE, the resolution may change automatically to FINE in case
memory is used for memory transmission.
Making a Single Copy
KEYS TO PRESS
1. Insert the documents face down into the
feeder.
09/12/1998 15:25
ONLINE
FAX: NO. & START
SCAN READY
NO.OF COPIES:01
ONLINE
THE DISPLAY WILL SHOW:
COPY: PRESS COPY
SCAN READY
ENTER & COPY KEY
ONLINE
COPYING
ONLINE
COPYING P.01
ONLINE
COPYING P.02
ONLINE
2. Press Copy.
3. Press Copy or just wait for 5 seconds