Filter
Top Products
PRINTING REPORTS AND LISTS
10-6
MFC 4450/OP-US-5.0
Transmission Verification (Xmit) Report
The Transmission Verification Report can be used as proof that you sent a fax. It lists
the name or fax number of the receiving party, the time and date of transmission, and
whether the transmission was successful. The factory default setting is OFF.
OFF: The report will be printed automatically only if an error occurs during
transmission. If the report says “Result: NG” then send all the pages again. If
the report says “Result: Check readability of transmitted page(s) 02, 05” then
send only pages 2 and 5 again.
ON: A report will be printed automatically. It is important to read the result of each
report to check that the transmission was successful.
KEYS TO PRESS THE DISPLAY WILL SHOW:
09/12/1998 15:25
ONLINE
ENTER NO. & SET
3.PRINT REPORTS
7.XMIT REPORT
XMIT REPORT:OFF
SELECT { } & SET
XMIT REPORT:ON
7.XMIT REPORT
1. Press Function.
2. Press 3.
3. Press 7.
4. Press Z (left arrow) or X (right arrow)
to choose the setting.
Example: ON.
5. Press Set.
6. Press Stop to exit.