Filter
Top Products
2-11
HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY
MFC 4450/OP-US-5.0
Information
-Sleep Mode is activated when the heater stops. However, the cooling fan
will continue to run until the MFC has cooled down. The actual time
before the fan stops will vary depending upon operating conditions.
-It will take approximately 12 to 30 seconds for the MFC to warm up from
the sleep mode before you can start printing or copying. The LCD will
show WARMING UP during this time. When it is ready it will automatically
start the last job you have entered.
NOTE: The cooling fan will continue to run until the temperature of the
MFC reaches a certain level. Even after the heater stops, the
MFC will have to warm up before copying and printing.
NOTICE