Filter
Top Products
6-3
MFC 4450/OP-US-5.0
4. Press Z (left arrow) or X (right arrow)
repeatedly until you find the number of
rings you want.
Example: 00.
When you set 00, you can receive your
incoming faxes without any rings.
5. Press Set.
6. Press Stop to exit.
RING DELAY:00
2.RING DELAY
The F/T Switch (Fax/Telephone Mode) (Only with an External
Telephone Connected to the MFC)
When you share one line for your telephone and fax application, in the F/T switch
mode, the MFC can determine whether an incoming call is a fax or a telephone call.
(See Chart below.)
Incoming Call
The MFC, all extensions
and external in the home
will ring for 0-4 rings
(Ring Delay - see page 6-2).
The MFC picks up
after Ring Delay
elapses.
The MFC picks up the call
and automatically detects
whether it is a fax or voice
call.
Automatic fax
call
Automatic or
manual fax call
Voice callVoice call or manual
fax call
Fax reception is
automatically
activated.
Only the MFC rings,
thus signaling you
to pick up the
external handset.
The MFC will ring for
several seconds,
depending on your
F/T ring time setting.
The fax message
is received.
The caller stays on the
line through the entire
10-60 second Ring Time.
You pick up the external
handset and press Hook.
The fax mode is activated.
Talk as normal or press
Start key or your Remote
Activation Code (*51) on
the external telephone to
receive a manual fax.
The caller may hang up.
A) If you are at the MFC
and using the external
telephone then, press
Start.
B) If you are not at the
MFC, press your
Remote Activation Code
(*51) to transfer the fax
call to the MFC.
You pick up any
extensions or external
within Ring Delay
selection.
You must manually
determine if it is a
voice or fax call.
Talk as
normal.
RECEIVING FAXES AND OTHER CALLS
BASIC SETUP TO RECEIVE FAXES
NOTE: The F/T ringing will continue for 10-60 seconds even if the caller hangs up
during F/T ring time.