Filter
Top Products
5-25
MFC 4450/OP-US-5.0
Sending FAX
Printing the Call Back Message
You can print a sample Call Back Message to check the format.
THE DISPLAY WILL SHOW:KEYS TO PRESS
1. Press Function.
2. Press 3.
3. Press 5.
09/12/1998 15:25
ONLINE
ENTER NO. & SET
3.PRINT REPORTS
5.CALL BACK MSG
PRESS START KEY
PRINTING
4. Press Start.
ECM (Error Correction Mode)
The Error Correction Mode (ECM) is a way for the MFC to check the integrity of a fax
transmission while it is in progress. ECM transmissions are possible only between
machines that both have the ECM feature. If they do, you may send and receive fax
messages that are continuously checked for their integrity.
Sufficient memory must be available in your MFC for this feature to work.
Error Retransmission
Error Retransmission is helpful when the receiving machine does not have ECM.
Even though your MFC can not check the integrity of the message, it will send the
affected page(s) again after occurrences of accidental noise have caused an error.
This feature is available only for memory transmission using Super Quick-
Scan (see page 5-8~13).
FAX TRANSMISSION OPTIONS SENDING FAXES