Filter
Top Products
5-103
Confidential
9.64 Main PCB
(1) Disconnect the 6 connectors and 6 flat cables from the Main PCB.
Fig. 5-131
Caution:
• After disconnecting flat cable(s), check that each cable is not damaged at its end or
short-circuited.
• When connecting flat cable(s), do not insert them at an angle. After insertion, check
that the cables are not at an angle.
Assembling Note:
• When assembling the Main PCB, ensure to place the Ferrite Core correctly.
DX solenoid connector
(For the models
with the DX only)
LT connector
FAN connector
HVPS PCB (Flat cable)
Thermistor connector
Main motor (Flat cable)
LVPS PCB connector
Polygon motor (Flat cable)
Wireless PCB harness
(For the model with
the Wireless LAN only)
LD harness (Flat cable)
Ferrite core
Relay rear (Flat cable)
Relay front (Flat cable)