Filter
Top Products
7-21
Confidential
Auto I/F Time Configure the setting for the interface open time. The function is in the
PC-Print. When the PC-Scan/Remote-SetUp works on the way, the
setting becomes invalid.
Media Type Effective for the print from the PC. When set the type of the recording
paper on the PC, the setting becomes effective. And this setting is
ignored. The default value is different by the country setting. CHN is the
Thin, and others are the Plain.
Paper(Size) Switching of the area of develop the image. Does not set the Paper Size
of the Menu, set the drawing size of the PC-Print. When set the size of
the recording paper on the PC, the setting becomes effective. And this
setting is ignored. The default value is different by the country setting.
US/CAN are the Letter, and others are the A4.
Copies Effective for the print from the PC. When set the number of the copies
on the PC, the setting becomes effective. And this setting is ignored.
Orientation Configure the switching for the print direction. Effective for the print from
the PC.
P-Pos X-Offset Configure the setting for the offset print position of the landscape
orientation. Effective for the print from the PC. When set the X-Offset on
the PC, the setting becomes effective. And this setting is ignored.
P-Pos Y-Offset Configure the setting for the offset print position of the portrait
orientation. Effective for the print from the PC. When set the Y-Offset on
the PC, the setting becomes effective. And this setting is ignored.
AutoFF Configure the setting for the ON/OFF of the Auto Form Feed. Effective
for the print from the PC.
AutoFF Time Configure the setting for the Time Out, when the Auto Form Feed is ON.
FF Surpress Configure the setting for the skip of the blank page. Effective for the
print from the PC. The blank data in the Copy/Fax cannot be turned ON/
OFF in this setting.
- Auto LF Configure the setting for the auto line feed.
- Auto CR Configure the setting for the auto Carriage Return.
- Auto WRAP Configure the setting for the auto CRLF at the print width.
- Auto SKIP Configure the setting for the skip at the back-end/tip of the recording
paper and add the blank space.
- Left Margin Configure the setting for the column space at the left end.
- Right Margin Configure the setting for the column space at the right end.
- Top Margin Configure the setting for the space at the upper end.
- Bottom Margin Configure the setting for the space at the bottom end.
- Lines Configure the setting for the number of the lines in the PCL.
- Error Print Configure the setting for the Error Print of the BR-Script 3.
LCD indication Detail description