Brother MFC-9130CW Printer User Manual


 
144
Reset functions B
The following reset functions are available:
1 Network
You can reset the internal print server
back to its default factory settings such as
the password and IP address information.
2 Address Book & Fax
Address book & Fax resets the following
settings:
Address Book
(Addresses and Groups)
Programmed fax jobs in the memory
(Polled TX, Delayed Fax, Batch TX)
Station ID
(name and number)
Coverpage Msg
(comments)
Remote Fax Options
(Remote Access Code, Fax Storage,
Fax Forwarding, Paging, PC-Fax
Send, and PC-Fax Receive
(Windows
®
only))
Report settings
(Transmission Verification Report/
Tel Index List/Fax Journal)
Setting Lock password
3 All Settings
You can reset all the machine’s settings
back to the settings that were set at the
factory.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
NOTE
Unplug the interface cable before you
choose Network or All Settings.
How to reset the machine B
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Initial Setup.
d Press Initial Setup.
e Swipe up or down, or press a or b to
display Reset.
f Press Reset.
g Press Network,
Address Book & Fax or
All Settings to choose the reset
function you want.
h Do one of the following;
To reset the settings, press Yes and
go to step i.
To exit without making changes,
press No and go to step j.
i You will be asked to reset the machine.
Do one of the following;
To reset the machine press Yes for 2
seconds. The machine will begin the
reset.
To exit without resetting the
machine, press No. Go to step j.
NOTE
If you do not reboot your machine, the
reset will not finish and your settings will
remain unchanged.
j Press .
NOTE
You can also reset the Network settings
by pressing , All Settings,
Network, Network Reset.