Brother PT-2730 Label Maker User Manual


 
INTRODUCTION
7
Safety Precautions
Battery
Follow these guidelines to avoid liquid leakage, heat, rupture of the battery and cause
personal injury.
DO NOT
throw into fire, heat up, short-circuit, recharge, or disassemble the battery
AC adapter
Follow these guidelines to avoid fire, damage, electric shock, failure or the risk of injury.
Always use the specified voltage
(120V) and the suggested AC adapter.
Failure to observe this may result in an
accident or damage. Brother shall not
assume any responsibility for any
accident or damage resulting from not
using the specified AC
adapter,adapter cord and USB cable.
Don't connect the enclosed AC
adapter, adapter cord, power plug and
USB cable to other products.
Unplug the AC adapter cord
immediately and stop using the P-
touch labeler during an electrical
storm. There may be a remote risk of
electric shock from lightning.
DO NOT
touch the AC adapter or
power plug with wet hands.
DO NOT
use the AC adapter in places
of high humidity such as bathrooms.
DO NOT
use a damaged adapter cord
or power plug.
DO NOT
place heavy objects on,
damage or modify the adapter cord or
plug. Do not forcibly bend or pull the
adapter cord.
DO NOT
drop, hit or otherwise
damage the AC adapter.
Make sure that the plug is fully
inserted in the power outlet. Do not
use an outlet that is loose.
Tape Cutter
DO NOT
touch the blade of the cutter
unit.
WARNING