Filter
Top Products
TROUBLESHOOTING
73
What to do when...
The P-touch labeler
stops while printing a
label.
• Replace the tape cassette if striped tape is visible, as this
indicates that you have reached the end of the tape.
• Replace all batteries or connect the AC adapter directly to
the P-touch labeler.
The label is not cut
automatically.
• Check that the Cut Option setting is not set to Chain or No
Cut, as the tape will not be fed after printing the label.
Alternatively, hold down the
Shift
key and press the
Preview
key to feed and cut the tape.
Label files saved
previously are now
empty.
All files stored in the internal memory are deleted if the
batteries are weak or the AC adapter was disconnected.
Problem Solution